The operation standards of hydraulic press brake machine are very necessary and reasonable for those who just start to use it to learn and read. Operating hydraulic bending machine according to the standards can greatly prolong the life of the machine and ensure the safety of the operator at the same time.
1. The operator must read the instructions in detail before using the bending machine to acquaint with and grasp the structure, performance and adjustment method of the bending machine.
2. If there are multi-operators operating the machine, confirm that there is no unsafe factor before stepping down the foot switch.
3. The clearance between the upper and lower molds must be adjusted evenly. When working, no tools can be placed on the lower mold and the worktable, and defects such as welding scarring cannot be found on the surface of the workpiece.
4. Always keep the bending machine clean. When using it, attention should be paid to the conditions of all parts of the bending machine at any time. If there is anything unusual, stop the machine immediately.
5. Generally, selecting die V that is 8 times as thick as the plate, that is, V = 8S.
6. Adjust the pressure strictly according to the sheet bending pressure gauge.
1. The operator must read the instructions in detail before using the bending machine to acquaint with and grasp the structure, performance and adjustment method of the bending machine.
2. If there are multi-operators operating the machine, confirm that there is no unsafe factor before stepping down the foot switch.
3. The clearance between the upper and lower molds must be adjusted evenly. When working, no tools can be placed on the lower mold and the worktable, and defects such as welding scarring cannot be found on the surface of the workpiece.
4. Always keep the bending machine clean. When using it, attention should be paid to the conditions of all parts of the bending machine at any time. If there is anything unusual, stop the machine immediately.
5. Generally, selecting die V that is 8 times as thick as the plate, that is, V = 8S.
6. Adjust the pressure strictly according to the sheet bending pressure gauge.
Comments
Post a Comment