At present, the operating system of CNC press brake in domestic market mainly includes Delem DA52 and Delem DA65W.The price of the two operating systems, Delem DA65W, is higher than that of Delem DA52, and the price difference is tens of thousands. After knowing the price of these two operating systems, I will give you a brief analysis of the differences between the two operating systems and how to choose them.
First of all, we must know the purpose of buying the CNC press brake is to process products and which products will be processed later. After all, buying equipment is a capital investment for the company, which is crucial for the future development of the enterprise.
If our products are more complex, small, and frequently changing product types, I feel that the Delem DA65W will be better. But a single large enterprise, Delem DA52, is basically enough.
The CNC press brake is compared with ordinary press brake, and the precision and efficiency of the processed products are higher. And CNC press brake is with deflection compensation and processing stainless steel. If the Angle between the bending of the product is higher, then the CNC press brake must be selected. Winding compensation is developed for the failure of bending Angle.
Secondly, the operating system of the CNC press brake is not more expensive, the more suitable for us, the choice must be based on the development of the enterprise.
The most obvious difference between Delem DA52 and Delem DA65W is that the Delem DA65W system can be programmed in 2d and 3d, as well as anti-collision simulation.
If you take a foreign or high-end customer list and use the DA65W color screen 3d simulation display to attract customers, it is a good demonstration of equipment.However, DA65W is much more expensive than DA52, especially for skilled bending workers. Unless the press brake is equipped with a 6 axis or above, DA65W or Switzerland's DNC880S or Italy's S504 system are not compatible. Because you do stainless steel workpiece, such as the workpiece is decorating engineering industry, suggesting to buy 4 + 1 shaft and adding a file automatically after R axis, so that avoiding changes in drawings relationship. It needs to run to the back of the machine to adjust the R axis and improve the work efficiency in the programming process, such as the automatic backstop of the workpiece. The automatic R axis is much easier to handle.
In short, if the CNC press brake is allowed under the enterprise strength, it is more than 1W to buy the 4+1 axis, but it is convenient for working, especially the small batch production. East forging CNC press brake's consulting hotline: +8613642957273! Also please visit our website for more information.
Comments
Post a Comment