The Advantages of Fiber Laser Cutting Machine

Fiber laser cutting machine because it can be transmitted through the optical fiber, the flexibility has been improved greatly , less failure, easy maintenance, fast working speed, so has a great advantage when cutting the thin plate within 4mm, but by the impact of solid laser wavelength It is poor performance in cutting thick plates. 

The wavelength of fiber laser cutting machine is 1.06um, can not be easily absorbed by non-metallic, so it can not cut non-metallic materials. The conversion rate of fiber laser photoelectric up to 25% or even more, The advantages of fiber laser cutting machine is quite obvious in the field of electricity consumption and cooling system.

According to the international safety standards, the laser damage rating of 4 classes, fiber laser due to its short wavelength is very damage to the human body especially to the eyes, so it is divided into the most dangerous level, for security reason, the fiber laser cutting machine processing need in a fully enclosed working environment.

The main advantages: high photoelectric conversion rate, less power consumption, can cut stainless steel plate and carbon steel plate within 12MM, it has the fastest laser cutting speed compared with Co2 and YAG laser cutting machine, small cutting clearance, good spot quality, can be used for fine Cutting.

More about fiber laser cutting machine:

Main configuration:

•  cutting system： CypCut，China
•  X, Y, Z-axis driven by servo motors
•  X, Y, Z-axis use Japan NSK precise bearings
•  Full CNC electric proportional valve，SMC，Japan
•  High-pressure pipeline system，AirTAC，Taiwan
•  Electrics，Schneider，France
•  Switzerland Ray Tools laser cutting head
•  Gear & rack, YYC, Taiwan
•  Speed Reducer, MOTOVARIO, France
•  Linear guide rail, Hiwin, Taiwan
•  DWT Cooler

Main Features:

Excellent beam quality: smaller focused spot makes more efficient work and cutting quality.

High cutting speed: its speed is twice of the same CO2 tube laser cutting machine

High stability: the world's top fiber laser generator makes stable performance, and the key components of the machine owns the life of up to 150,000 hours

High electro-optical conversion efficiency: fiber laser is three times higher than CO2 laser and saving energy

Low use-cost: the whole machine consume less energy, only 25%-30% of traditional CO2 laser machine

Low maintenance cost: no laser working gas, it is by fiber optic transmission, without lens reflecting, can save a lot of maintenance costs.

Smart operation and easy maintenance: optical fiber transmission, no need to adjust the optical path

Super flexible light guide effect: compact structure, satisfies flexible processing requirements

GLD3015F OPEN-TYPE DOUBLE-DRIVE FIBER LASER CUTTING MACHINE
Model	GLD3015F
Working Area	3000*1500mm
X-axis Travel	1500mm
Y-axis Travel	3000mm
Re-position Accuracy	±0.03mm
X/Y axis Max Speed	90m/ min
Power Rated Voltage/ Frequency	380V 50Hz
Laser Power	500-2000W
Power Requirements	380V/ 50Hz Three- Phase Four- Wire
GLD4015F OPEN-TYPE DOUBLE-DRIVE FIBER LASER CUTTING MACHINE
Model	GLD4015F
Working Area	4000*1500mm
X-axis Travel	1500mm
Y-axis Travel	4000mm
Re-position Accuracy	±0.03mm
Transfer Method	Precision Rack with Double Drive
X/Y axis Max Speed	90m/ min
Power Rated Voltage/ Frequency	380V 50Hz
Laser Power	500-2000W
Power Requirements	380V/ 50Hz Three- Phase Four- Wire