Press Brake Controller For Choice

There are various of controller for press brake machine. Here to introduce some general types as below:

Estun E21 Introduction:  E21 controller and converter are controlled by bus communication, simple wiring, high performance, quick and accurate positioning of the backgauge and stop fingers material.Built-in time relay can realize multiple logic functions, greatly increasing the efficiency and precision of bending machine.
Standard:1,Monochrome LCD box panel.2,Integral factor freely programmable.3,Spindle offset allowance.4,Automatic positioning control.5,Internal time relay.6.Stock counting.7,One-key backup / restore.8,Backgauge position display with 0.01mm resolution.9,Chinese/English menu operation.10,Mm/inch.11,Program memory of up to 40 programs and each up to 25 steps per program.
E200p controller + servo system can realize the perfect control of conventional torsion shaft bending machine, by bus to realize the backgauge, stop axis high-speed precise positioning, the built-in logic functions, can be directly controlled machine tool movement (X, Y aix), promote the overall price of machine tool .
Main Function:
LCD display，240*128
A multi-step programing to run automatically
Postioning in a row
Automatic way to avoid the backgauge with the expected workpieces interference
One-way location,elimination of screw drive space
Duke/british system is available
Chinese and English menu operation
Automatic compensation of location
Adequate storage space for processing procedures
Memory function of power off action

Delem DA41S Introduction:
The da - 41s control provides a complete solution for the traditional 2-axis braking application.Based on the state of art electronics, a general solution for control of the axial and post-test shafts is provided, as well as flexible I/O configurations.
 
Its bright LCD shows clear and easy to control functions.Digital programming, with angles, tools, and material parameters, can be done in a direct table overview.Bending parameters can be selected through user friendly cursor operations.
Standard:
Using servo control technology
High-quality foil cover with integrated membrane switchs
4.7”high bright liquid crystal display screen with multi-nation language interface including Chinese
Die parameter setting,bending angle programming
Tool library
About 100 programs ate stored,and there are 25 operations in each program
The escaped material is programmable,the processing quantity is accountable,there is memory to power off, and conversion between metric system and inches system.

Delem DA52s
Numerical, one page programming
Quick, one-page programming
Hotkey navigation
6,4″ VGA color LCD (TFT)
Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
Crowning control
Tool/material/product library
USB, memory stick interfacing
Servo, frequency inverter and AC control for back-gauge axis
Advanced Y-axis control algorithms for closed loop as well as open loop valves
CNC/ DA-56S System On Windows Functions:
1.10.4” monocolor Bright LCD screen,Workpiece and tooling  display in  color graphics.2.Automatic workpiece length calculation.Graphical simulation  of  bending sequences. 
3.Display of workpiece profiles before and after bending.
4.
3.Display of workpiece profiles before and after bending.
4.Automatic pressure output calculation and adjustment.
5.
5.Back/front gauge control, Cutting angle control cutting  clearancecontrol and cutting stroke control.
6.Programmable pressing speed and pressure-holding time.
7.
7.Equipped with European optical scales. Accuracy  of repeat positioning is ±0.01mm.
8.
8.Automatically calculate daylight and the distance of slow speed point.
9.
9.Various angles, including arc, can be accomplished by the same set of tooling.
10.Graphical display of punch and die. 
11.
10.Graphical display of punch and die. 
11.Program memory of up to 100 programs, each program  have 25 steps.
12.Automatic adjustment of table deflection according to angular tolerance.
13.Back gauge travel under 500mm with speed of 200mm/sec.
14.Automatic R-axis adjustment according to height of lower die or other requests.
15.Multi-language: English, Japanese,, Chinese,Korean available.
16.Y1 & Y2 axes are controlled by proportion servo valve.
17.Easy operation with Manual, Automatic and Step-by-step modes.
18.Basic Windows system functions, 2 USB ports.
19.Second servo axis(DA66t).
DA-58T Introduction:
Delem DA58T developed highly effective touch-control controls with DA-50 system foundation.The da-58t has a powerful and compact control system that provides the operator with a numerical control touch solution.The accuracy and efficiency of work have been greatly improved.
 DA-58T Features:

1. 15" color LCD display. (TFT).

1. Full screen touch control.

1. 2D graphic programming by touch-screen control and 3D product graph display.

1. Automatic sequence computation.

1. Automatic pressure computation.

1. Automatic collision detection.

1. USB keyboard, mouse and flash memory drive..

1. Programmable material properties.

1. Automatic crowning adjustment computation.

1. Diverse comp uting programming functions.

1. Mm/inch.

1. One page programming table.

DELEM DA66T CNC System Introduction:
2D programmingcollision detection functions and automatic bend sequence calculation.There are multiple tool stations to provide efficient and realistic feedback on the feasibility and process of the product..The stable and convenient delem touchscreen user interface can be navigated directly between programming and production..Functions are directly located where they are needed and provide optimized ergonomics throughout the application.

Standard:
1. 2D graphical touch screen.
2. 3D visualisation in simulation and production.
3. 17" color LCD display. (TFT).
4. Windows applications compatible.
5. Delem Modusys compatibility. (module scalability and adaptivity)
6. USB keyboard, mouse and flash memory drive.
7. Sensor bending & correction interface.
8. Open system architecture.
9. User specific application support within the controllers multitasking environment.
10. Equipped with European optical scales.

Main Function:

1. Automatic bending sequences setting and calculation .
2. Multi-aspect programming,data programming,graphics programming and one page programming table.
3. Optional unit: mm/inch, KN/ton.
4. Material properties and axes speed can be programmed.
5. Multilingual selection.
6. Bend sequences and real-scale tooling visualization when working.
7. Computed functions:tooling safety zones, press force,developed length, crowning adjustment,  axes position, operation modes.
8. Step repeat up to 99  and all axes can be hand-wheel movement .
9. Error messaging system.

Main Function:

1. Automatic bending sequences setting and calculation .
2. Multi-aspect programming,data programming,graphics programming and one page programming table.
3. Optional unit: mm/inch, KN/ton.
4. Material properties and axes speed can be programmed.
5. Multilingual selection.
6. Bend sequences and real-scale tooling visualization when working.
7. Computed functions:tooling safety zones, press force,developed length, crowning adjustment,  axes position, operation modes.
8. Step repeat up to 99  and all axes can be hand-wheel movement .
9. Error messaging system.

To know more about it, please feel free to check our official website: www.gldma.com.